Products details

Single-Phase Digital UIP Combined Meter

  • Category : Digital Meter
  • Tel : +86-577-62627957
  • Email : 1273444947@qq.com
  • Fax : +86-0577-62627466
Technical parameters
Measuring range: Voltage: AC 0~500V ; Current:AC 0~9999A ;Active Power:0~9999KW.
Accuracy rating:±0.5 % FS±1 digit.
Signal input: Voltage :AC 0~500V(PT */ 100V) ,Current :AC 5A (CT */ 5A )
Sampling rate: about 1 times/s.
Measuring display mode: RMS measurement, four-digit LED nixietube display.
Display resolution: Max. display resolution : 0.001A,0.1V,0.1KW.
Input circuit consumption: current<0.5VA,voltage<1VA
Auxiliary power supply: AC 220V,50/60Hz(Can customize other values).
Auxiliary supply consumption:< 3VA.
Additional functions
2-channels switch value output: Higher and lower limit alarm output by two groups of reply, contact rating
is AC250V/2A、DC30V/2A.
1-channels analog quantity outpu: can be set freely as DC 0~10mA、0~20mA or 4~20mA, accuracy rating is ±0.5 % FS,e l e c t r i c a l i s o l ation between the signal input and auxiliary power supply ,transmitting output load resistance:≤500Ω.
Communication interface:RS485 serial communication ,applying MODBUS_RTU communication protocol.

Model and dimension(unit :mm)


Terminal arrangement
Attention : If it is not the same with the wiring schema of diagram behind case , please accord to the one of diagram behind case

Typical connection

Welcome to our website. If you have any requests or suggestions,please feel free to email us at 1273444947@qq.com or use the following enquiry form. Please allow us to provide you with the best service.